Publications 2007

Main content

Stator-clocking effects on the unsteady interaction of secondary flows in a 1.5-stage unshrouded turbine.
T. Behr, A.I. Kalfas, and R.S. Abhari
Proceedings of the Institution of Mechanical Engineers. Part A, Journal of power and energy, (2007) London: Professional Engineering Publishing.
Experimental Investigation of the Aerodynamic Drag of a High Altitude Airship.
Behnam H. Beheshti, Andreas Soller, Fabian Wittmer, and Reza S. Abhari
7th AIAA Aviation Technology, Integration, and Operations Conference (ATIO) - 17th Lighter-than-Air Systems Technology Conference : 18 - 20 September 2007, Belfast, Northern Ireland, (2007) Reston, VA: American Institute of Aeronautics and Astronautics.
Unsteady Flow Physics and Performance of a One-and-1/2-Stage Unshrouded High Work Turbine.
T. Behr, A.I. Kalfas, and R.S. Abhari
Journal of Turbomachinery, (2007) New York: ASME.
Control of rotor tip leakage through cooling injection from the casing in a high-work turbine. Experimental investigation.
Thomas Behr, Anestis I. Kalfas, and Reza S. Abhari
Proceedings of the ASME Turbo Expo 2007, (2007) New York, N.Y.: The American Society of Mechanical Engineers.
Desensitization of Turbine Flow Field and Performance from Rotor Tip Gap using Casing Injection.
Thomas Behr, Anestis I. Kalfas, and Reza S. Abhari
Proceedings / XVIII International Symposium on Air Breathing Engines (ISABE) : Beijing, China, 2 - 7 September 2007, (2007) Reston, VA: American Institute of Aeronautics and Astronautics.
In-engine turbine heat transfer measurement.
M. H. Brunner, M. G. Rose, K. Mühlbauer, and Reza S. Abhari
Proceedings of the Institution of Mechanical Engineers. Part A, Journal of power and energy, (2007) London: Professional Engineering Publishing.
Modeling of Film Cooling. Part II: Model for Use in Three-Dimensional Computational Fluid Dynamics.
André Burdet, Reza S. Abhari, and Martin G. Rose
Journal of Turbomachinery, (2007) New York: American Society of Mechanical Engineers.
Three-Dimensional Flow Prediction and Improvement of Holes Arrangement of a Film-Cooled Turbine Blade Using a Feature-Based Jet Model.
André Burdet, and Reza S. Abhari
Journal of Turbomachinery, (2007) New York: ASME.
Parametric study of tip injection in an axial flow compressor stage.
Gabriele Cassina, Behnam H. Beheshti, Albert Kammerer, and Reza S. Abhari
Proceedings of the ASME Turbo Expo 2007. Volume 6, Part A, (2007) New York, N.Y.: The American Society of Mechanical Engineers.
A Flow Adaptive Aerodynamic Probe Concept for Turbomachinery.
C. Lenherr, A.I. Kalfas, and Reza S. Abhari
Measurement science & technology, (2007) Bristol: IOP Publishing.
 
 
Page URL: http://www.lec.ethz.ch/resources/2007.html
Sat Jun 24 02:11:30 CEST 2017
© 2017 Eidgenössische Technische Hochschule Zürich